Skip to main content

Canon Pixma MP495 printer

Canon Pixma MP495 printer
MAJ15/12/16
Downloads:

Cartridges:
  • PG-210: Black Ink
  • PG210XL: Back ink XL
  • CL-211: Color ink
  • CL211XL: Colour Ink XL

    Troubleshooting:
    • Waste ink counter Reset (error E08):
    Service tool V3400 for resetting Canon printers counter
    • Ink cartridge reset (ship reset):
    Solution 1 : When "empty cartridge" is displayed, Hold on the "cancel" button until "processing"appears.
    Solution 2: Hold on the "Stop" button until "processing" appears

    • Error E16 or E,1,6:
    Hold on the "Stop" button for 5 seconds.

    Libellés :

    Comments

    Jacqueline said…
    this is amazing! I just bought new ink for my pixma. Since it was a refilled cartridge it kept saying I ran out of ink when I just bought new ink! your solution was exactly what I needed!
    February 3, 2012 at 9:00 AM
    LockMonster said…
    Tried all of these, no luck with my MP495 Pixma
    February 13, 2012 at 2:25 AM
    Bobby Thomas said…
    Step 1) Unplug the printer from Power and wait 5 sec then Plug it back in.

    Step 2) Press "Stop/Reset" button for 2 sec and hold it.

    Step 3) Now Press and hold the "Power" button also with "Stop/Reset" for 5 sec.

    Step 4) Release only "Stop/Reset" and wait for 2 sec (still holding "Power" button)

    Step 5) Now press and release "Stop/Reset" 5 times.

    Step 6) After 5 sec release "Power" button also (No LCD only power light seen).

    Step 7) Wait for a minute (after the printer resetting).

    Step 8) Now power off the printer by pressing "Power" button.

    Step 9) After 30 Seconds press "Power" button again. Ready for Print now !!!
    June 14, 2012 at 4:45 AM
    yogagye said…
    I am trying to setup my Pixma printer in a new network, because I moved to another state. It keeps asking me for the "printer password", I have no idea if I set a password for the printer a year ago when I did the installation in my previous home network. Could anyone give a hint of what should I do?
    June 26, 2012 at 1:58 PM
    Unknown said…
    same problem as yogagye,

    Does anyone knows the default admin password for the printer?.
    June 27, 2012 at 1:56 AM
    Mariam said…
    You saved my life and my marriage. Not kidding. Thank you so much
    August 2, 2012 at 2:54 AM
    Unknown said…
    Bobby's answer worked for me. I had an error code 05 after replacing the original ink cartridges with refilled cartridges. First I tried Bobby's solution, which got rid of the error code. But when I tried to print, it still said I didn't have any black ink. At that point, I held down the Stop button for five seconds and the LED switched to the swirling "processing" image. When it still wasn't printing, I tried pressing the Black key once, and then it kicked in! Now it prints without incident, even though the LED lights under both color and black are orange and blinking.
    August 11, 2012 at 7:04 PM
    Unknown said…
    Awesome Bobby!! Cannon's site said the only solution was to take it in for service for a code 5200. Well, your advice fixed it! Thank you so much!!
    September 17, 2012 at 2:50 PM
    Gabrielle said…
    I'm still having a problem with my canon mp495 because of installing re-manufactured ink. I did what Bobby said and STILL no luck. The error code WILL not reset for some reason. Any ideas?
    October 6, 2012 at 11:55 AM
    Unknown said…
    My MP495 says I have a paper jam however there is no paper in the printer. Any ideas?
    October 20, 2012 at 9:09 AM
    LEH said…
    Hi John,

    Try this:
    http://fix-your-printer.blogspot.fr/2012/07/solving-error-p02-on-canon-printers.html

    and that:
    http://fix-your-printer.blogspot.fr/2009/04/error-6a00-on-canon-pixma-printers.html
    October 21, 2012 at 8:30 AM
    Anonymous said…
    Just but Genuine Canon ink.... period!
    January 27, 2013 at 9:20 AM
    Anonymous said…
    Thanks so much Bobby! I called Canon support and they told me the only option was to send it in for repair. Your fix worked!!
    March 27, 2013 at 9:10 AM
    Jay-Fly said…
    My bro Bobby u r a life saver man!!!! Thnx very much!!
    April 30, 2013 at 11:33 AM
    Anonymous said…
    Bobby really appreciate the tips man!! wuz struggling with this stuff all day man but finally a breakthrough !!!!
    April 30, 2013 at 11:34 AM
    rosesue8 said…
    i tired using bobby's steps but the printer shuts down before i can finish the procedure
    March 4, 2014 at 10:12 PM
    Anonymous said…
    Thanks Bobby.

    A huge help to an annoying problem.

    Always displayed 'color' ink cartridge when I selected 'black only'. All I wanted was black.

    Thanks, very good Bobby
    July 15, 2014 at 3:44 AM
    Anonymous said…
    If all else fails, I just solved it by holding the black button & stop/resume/reset button simultaneously (press black first). After 5 seconds the display showed a spinning sign, then it worked like normal. (I have a Pixma 495 by the way.)
    August 16, 2014 at 6:17 PM
    Boston Corbett said…
    I scanned an image with my MP495, now that image appears as a watermark on everything I ever scan and I can't remove it. What do I do?
    February 9, 2016 at 4:47 PM
    It's Mark said…
    I cleaned my MP495 ink absorbers and reinstalled, but cannot get the E08 Error Alarm turned off. I tried everything on the internet, including Bobby's recommendations, but no luck at all. Help!
    December 13, 2016 at 3:06 PM
    J.Lassalle said…
    Hi Mark,

    Try this procedure:
    http://fix-your-printer.blogspot.fr/2016/02/service-tool-v3400-for-resetting-canon.html
    December 15, 2016 at 9:18 AM
    Post a Comment

    Popular posts from this blog

    How to fix error B200 on canon Printers

    MAJ11/06/17 Error B200 means the printhead voltage or temperature is not normal. The Printhead could be defective.... but first, try these solutions below: Solution 1 : Disconnect the power cable from the printer. Wait 1 hour. Connect the power cable Solution 2 : Check and Clean Head contact pin condition of the carriage unit Check Cable connection especially the carriage FFC Solution 3 : Turn off the power Open the panel Turn on the power Wait for print carriage to start moving to the left. Let it go past half way Before print carriage reaches left hand side shut the cover. Leave the Printer turned on Solution 4 : Unplug the power cable. Open the printer Push the whole print head mechanic to the center While the printer still open, plug the power and turn it ON.  When the printhead still moving and is going to the very LEFT, close the cover.  Wait until its boot up.  Solution 4a: Take out all of the ink cartridges ...
    217 comments
    Read more

    How to solve error code 006 with Canon Service Tool V3400

    MAJ 25/08/17 The Service Tool V3400 allow to reset the counter of some Canon printers. For the error code 006 , try this : Solution 1: Check your cartridges: an empty cartridge can lead to error 006 Solution 2 : After you avec clicked on "Main", wait a few minutes.  If the error still here, restarts the Service Tool Solution 3 : Close the service tool Disconnect the USB cable from the printer After 10 seconds, plug back the cable to the printer On Windows, click next when appears "New device" Open the service tool
    11 comments
    Read more

    Service tool V3400 for resetting Canon printers counter

    MAJ13/02/18 The Service Tool V3400 , and service tool V3600 , allow you to reset the waste ink pad counter on some Canon printers:  You can solve the messages errors "Waste Ink Tank Full" or "Waste Ink Pad Full", "error 5B00" or "Error P07" on these printers: Canon Pixma iP2700, iP4800, iP4810, iP4840, iP4850, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880 Canon Pixma MP230, MP240; MP250; MP260; MP270; MP280; MP480; MP490; MP540; MP550; MP560; MP620; MP630; MP640; MP980; MP990; Canon Pixma IX6500, IX6510, IX7000 Canon Pixma IP3600, IP4940 Canon Pixma PRO9000, PRO9500 Canon Pixma MG2120. MG2140, MG2240, MG2250, MG2440, MG3240, MG3140, MG4100, MG4140, MG5140, MG5150, MG5240, MG5340, MG6140, MG6240, MG8140, MG8240  Canon MX397, MX320, MX330, MX370, MX860  etc Where can you download the Service Tool V3400 ? It is free here: https:/ /1fichier. com/ ?c198556kp0 There is too a paid version here: V3400 C...
    40 comments
    Read more