Fix your printer !

Here are some solutions to solves error code 015-0001 on printers Canon i-SENSYS MF623C, MF8350Cdn, mf9280cdn, etc Solution 1 : Description Developing roller release operation defect After the specified time from rotating the main motor for the developing roller depress/release, the output of the developing home position sensor does not change. Causes: Developing home position sensor defect, Main motor defect, DC controller PCB defect Remedy: Check the connector of the developer home position sensor, main motor, DC controller PCB  Replace the developer home position sensor Replace the main motor  Replace the DC controller PCB Solution 2 : Cassette 1 lift-up errorAfter lift-up of the Lifting Plate of the cassette of the host machine started, ON status of the Lifter Sensor of the cassette of the host machine was not detected within the specified period of time. Remedy. While the cassette of the host machine is removed, turn ON the power and insert...

When the printer display the message "printer offline", try these solutions: Solution 1: In Windows, go in printers section Right clic on the printer et check if it 's online Solution 2 : Check the USB cable or the Wifi (is it activate ?). Solution 3 : Plug the USB cable in another USB port. Solution 4 : Unplug the USB cable Uninstall the printer's driver Reboot the computer Install the driver and plug the USB cable.

MAJ13/02/18 The Service Tool V3400 , and service tool V3600 , allow you to reset the waste ink pad counter on some Canon printers:  You can solve the messages errors "Waste Ink Tank Full" or "Waste Ink Pad Full", "error 5B00" or "Error P07" on these printers: Canon Pixma iP2700, iP4800, iP4810, iP4840, iP4850, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880 Canon Pixma MP230, MP240; MP250; MP260; MP270; MP280; MP480; MP490; MP540; MP550; MP560; MP620; MP630; MP640; MP980; MP990; Canon Pixma IX6500, IX6510, IX7000 Canon Pixma IP3600, IP4940 Canon Pixma PRO9000, PRO9500 Canon Pixma MG2120. MG2140, MG2240, MG2250, MG2440, MG3240, MG3140, MG4100, MG4140, MG5140, MG5150, MG5240, MG5340, MG6140, MG6240, MG8140, MG8240  Canon MX397, MX320, MX330, MX370, MX860  etc Where can you download the Service Tool V3400 ? It is free here: https:/ /1fichier. com/ ?c198556kp0 There is too a paid version here: V3400 C...

Here is the procedure for removing the printhead on these priters: Canon IP7220, IP7120, MG6320, MG6420, MG6350, MG5420, MG5520, MX922, IP7250, MG5450 ( QY6-0082 ): Open the cover Remove all the cartridges Pull the lever with colors on it The printhead is unlocked and you can remove it Video of the procedure:

The error code E14, 1E4 or 14E could appears on these Canon printers: MP140, MP150, MP160, MP190, MP280, etc... According to the manual, it means the cartridge is in the bad location. Solution 1 : Check that the cartridge is in the good location. Solution 2 : If the cartridge is in the right location, try to reinstall it Solution 3 : Clean the cartridge contacts with a wipe. Solution 4 : The cartridge could be defective, try to install a new one

You have an error B200 on your printer and you can't print anymore. If you just need to scan, try this: This trick can work on some Canon MP printers: Switch on the printer. Open the cover as if you want to replace a cartridge. When the printhead move and stop, wait 5 seconds et close the cover. The printer will show a Menu in which you can choose the scan function. For the error code B200 , here are some solutions to solve it: Error B200

Il peut y avoir, entre autre, ces deux explications à ce code d'erreur. Pour certains modèles, les lumières orange et verte clignotent alternativement 20 fois. Solution 1 : Power off the printer and disconnect the power cable Wait 10 minutes. Plug in the power cable and switch on the printer Solution 2 : Check all the cartridges: they must be well inserted. Solution 3 : Chek the chip of the cartridges: it should be well positioned. Solution 4 : The sticker on the front of the cartridge can interfere with the LED recognition during initialization: remove it gently. Solution 5 : The mainboard is defective

Canon Service Tool V3400 allow you to reset the printer waste ink counter. It solves the message "waste ink tank full" or leds orange et green blinking 8 times on these Canon printers: Canon Pixma iP2700, iP4800, iP4810, iP4840, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880 Canon Pixma MP230, MP270, MP280, MP490 Canon Pixma IX6500, IX6510 Canon Pixma IP3600 Canon Pixma PRO9000 Canon Pixma MG2120. MG2140, MG2240, MG3140, MG4140, MG5140, MG5240, MG5340, MG6140, MG6240, MG8140, MG8240 Where to find the Service Tool V3400 ? Here is a paying version: V3400 Canon Service Tool for all iPxxxx series, iX series, MGxxxx series, MP series printers maintenance and reset. It should be possible to find a free version, but check the link for any trojan or virus. How to use Service Tool V3400 ? Unzip the file. Set the printer in Service Mode: - Power OFF the printer by Power button. - Connect the printer with USB cable to the PC. - ...

You can have error code 5,156,61 on these Canon printers: MG2100, MG2120, MG2150, MG6250, MX375, MX360, MP495, MP230 etc... It usually concerns the scanner: " Code:5,156,61 Cannot scan for these reasons: -Scanner is turned off.-USB cable is disconnected " Solution 1: check USB connection Try another USB port on the PC If USB cable is connected to an USB Hub: connect diretly the cable to the PC. Try another USB cable Solution 2: Sometimes, an antivirus or the firewall of Windows can block the use of Canon software. Check this point by disabling them temporarily. Solution 3: Reinstall the drivers of the printer

When you have error code 5400, the printer Canon flashes orange/green 6 times . This means there is an anormal internal temperature. Solution 1 ( from Canon support): Cancel printing and power off the device. Power on the device.  If the problem persist, contact the Service Center. Solution 2: Remove cartridges. Remove the printhead. Powr off and unplug the printer for an hour. Plug in and switch on the printer. Install the printhead and cartridges. Solution 3: A part is defective, it could be: The carriage unit The main board The printhead

Here are some solutions to solve error code 5,156,61 : Solution 1 : If you have an USB hub Remove the hub and connect the printer directly to the PC. Solution 2 : Try another USB port on the PC. Solution 3 : Try another USB cable. Solution 4 : Unisntall the driver of the printer. Disconnect and power off the printer Download the last driver from Canon. Reboot. Install the new driver

The message " Type of print head in incorrect. Install correct print head " may be followed with error code U052 . Solution 1: Reinstall the cartridges. If the error occurred after changing a cartridge: replace it. Solution 2: Reinstall the printhead. Solution 4 : Clean the printhead Solution 4: The print head is broken and must be replaced. Printhead list

Eror code E42 or 5010 requires servicing... But, firt, try these two solutions. It could be a scanner dysfunction due to shock. Solution 1 : Open the right side of the printer (three screws) and release the plastic part. Reconnect the cable unplug. Reset the plastic part Solution 2 : Open the right side of the printer (three screws) and release the plastic part. There is a set of cables on the l eft : check that there is no one that is cut If this is the case: strip the cable, connect both ends and surround with electrical tape.

Here is the procedure to reset waste ink absorber counter : Turn the printer power off. While pressing the "Resume/Cancel" button, press and hold the "Power" button. (The Power LED lights in green to indicate that a function is selectable.) While holding the "Power" button, release the "Resume/Cancel" button.  While holding the "Power" button, press the "Resume/Cancel" button 2 times, and then release both the "Power" and "Resume/Cancel" buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) When the Power LED lights in green, press the "Resume/Cancel" button 4 times to reset ink absorber counter. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) About Canon Pixma Pro9500 a...

Here are some solutions to disable ink level on some Canon printers . Solution 1:  Press "Resume/Cancel" button. It works on these Canon printers:  BJC series: bjc3000, bjc8200 S series: s400, s600, s800, s520, s6300, s9000 I Series: i255, i320, i350, i355, i450, i470d, i550, i560, i850, i950, i6100, i6500, i9100 Pixma series: ip1000, ip1200, ip1300, ip1500, ip1600, ip1700, ip2000, ip2200, ip3000, ip4000 Solution 2:  Hold on "Resume/cancel" button at least 5 seconds. It works on these Canon printers:  Pixma series: ip1880, ip1980, ip3300, ip3500, ip4200, ip4500, ip5200, ip6700d, pro9000, 9500, ix4000, ix5000 Solution 3:  Press on the "Start" button, then on "Color" for the color cartridge or "Black" button for the black cartridge. It works on these Canon printers:  Pixma MP series: MP150, MP160, etc  Solution 4:  Hold on "Stop/Reset" button at least 5 seconds. It works on these Canon printer...

Message: " Error in scanner. Turn of and follow instructions in manual. Scanner driver will be closed ", error 100 250.0.0 This is an error scanner Solution: Uninstall the driver of the scanner Download un install the last version of the driver. http://www.usa.canon.com/cusa/support

MAJ 22/06/16 The printhead is probably broken. But try these solutions: Solution 1 : Remove and replace the cartridges. Solution 2 : Insert new cartridges Solution 3 : Reseat the print head to correct print issues or clear error. Solution 4 : See solutions for error U052 Link : The printheads for Canon Inkjet printers

MAJ 03/01/15 Error 6A81 appears on Canon printers like Pixma IP4800, MG5140, MG5150, MX882... Solution 1 : This is a purge unit error. There maybe something jamming the purge unit or just a absorber out of place which is picking up on the carriage preventing it from moving correctly.  Try to move the carriage away from the purge (its where the printhead/carriage parks its self on the right side of the machine) with no resistance then you can shine a torch into the machine and look at the purge unit.  There maybe crumpled paper jammed in the purge.  If all looks well, the purge unit may be defective and had to be replaced.  Solution 2 : The wiper on the purge may have stuck. It slides back and forth and they have been known to stick.  Push it with a long screwdriver to see if it moves. Solution 3 : Something is blocking the printer inside. It could be a paper jam or a foreign object.  Check using a flashlight, to ensure t...

Error code 5,155,55 , is a communication error between the scanner and the computer. This error could appears with Canon, Brother, HP, Epson printers... Solution 1 : Power off and unplug the printer from the computer. Uninstall the Canon software. Restart the computer and download the last Canon driver Install the driver and restart Windows Reconnect the printer and switch it on. Solution 2 : Check for the USB cable: it must be connected to the back of the printer. Try another USB cable. Solution 3 : Connect the USB cable on another USB port of the computer.

Error P22 or P,2,2 is a scanner error. Solution 1 : Power off the printer unplung the power cord Wait 5 minutes Plug in the power cord Switch on the printer Solution 2: If the printer is still under warranty, contact the Canon support. Solution 3: The scanner unit or the logic board is defective. The best thing to do: buy a new printer !