Fix your printer !

Le message " Clean Sensor " ou "Détecteur Nettoyage" a plusieurs causes. Solution 1 : The firts thing to do: open the cover (cover D): Close it very slowly: it will clean the sensor. Do it 2 or 3 times in succession: Solution 2 : Open the front cover (cover D) Remove the waste ink box. Clean the photoconductor wire: hold the cleaning knob and move it slowly in and out a few times (5-10 times): Clean the exposure window: hold the knob (under the photoconductor cleaning knob) and move it slowly in and out a few times (5-10 times).  Put back the waste ink box. Close the cover Power off the printer during 5 minutes Solution 3 : When using remanufactured toner. Verify each toner. Solution 4 : Look inside the transfert belt if a roller did not go out of its axis.

Procedure to clean the print head: Remove the cleaner cover on the right side of the printer.  Then, open Cover A .  Fully extend the blue lever on the right inside the printer. Fully extend the blue cleaner , and move it slowly in and out five times. Wipe off any loose toner on the blue cleaner . Ensure that the cleaner is moved out until it stops and then pushed back in. Otherwise the printer may not be cleaned effectively. Push back the blue lever inside the printer. Close Cover A , then the cleaner cover .