Power Drain:
- Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
- Press and hold the Power button for 60 seconds.
- Connect the cable and turn ON the printer.
Partial Reset:
- Remove the power cable from back side of the printer while its ON.
- Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
- If printer turns OFF, press power button to turn it ON.
Semi-Full reset:
- Remove the ink cartridges.
- Remove the power cable from back side of the printer while its ON.
- Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
- If printer turns OFF, press power button to turn it ON.
- Insert the ink cartridges.
Full-NVM Reset:
- Remove the ink cartridges.
- Remove the power cable from back side of the printer while its ON.
- Press and hold "OK" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
- If printer turns OFF, press power button to turn it ON.
- Insert the ink cartridges.
Comments
colour printer
I am still getting the "Reset Power" blinking after trying the full reset (I worked my way to the full reset after trying each of the other suggestion in order.)
What is the error code on your printer ?
Any other solution than dropping it away?