Skip to main content

SSC Service Utility Software to reset Epson printers


SSC Service Utility allow to do many things with Epson printer :


- Work directly with CSIC in Epson Stylus printers cartridges.
- Reset or rewrite any chip using special addon device.
- Freeze internal ink counters.
- Reset internal ink counters even with empty cartridges.
- Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
- Hot swapping of cartridges supported.
- Resetting of protection counter.
- More then 100 different Epson printers supported


The site: http://www.ssclg.com/epsone.shtml

Download the 4.30 version


Printers you can reset with SSC utility:

Epson Stylus Сolor 400/440/480 LPT/480SXU/580/600/640/660/670/680/777/740/760/ 800/850/860/880/900 / EM-900C/980/1160/1520/3000
C20 / C40 / CL-750/C41 / C42 / C43 / C44 / C45 / C46 / C47 / C48/C50/C60/C61
C62 /C63 / C64 /C65 / C66/C67 / C68 / D68/C70/C80/C82/C83 / C84/C85 / C86/C87
C88 / D88 and PE
Photo RX420 / RX425 / RX430 /RX500 / RX510/RX520/RX600 / RX610/RX620/RX700 CX3100 / CX3200/CX3500 / CX3600 / CX3650/CX3700/CX3800 / CX3810 / DX3800/CX4500 CX4600/CX4100 / CX4200 /CX4700 / CX4800/DX4200 / DX4800 /CX5100 / CX5200 /CX5300 / CX5400 CX6400 / CX6600 /CX6300 / CX6500 /CX7800 Photo /Photo EX /Photo 700 / IP-100/750 / PM-770C /780 / 790 /
PM-780C /810 / 820
Photo 820 /825 / 915/830 / 830U/870 / PM-875DC /R200 / R210/R220 / R230
R300 / R310 / Photo R320/R800 / PX-G900/R1800/R2400/890/PM-890C/PM-A700
PM-G720/PM-970C/895/ 785EPX
Photo 900 /925 / 935/ 950 / 960 / PM-950C/1200 / PM-3000C/1270 / PM-3300C/1280 / PM-3500C
Photo 1290/2000P/2100/2200 / PM-4000EPX/Pro 5000 / PM-5000C


Troubleshooting:
Link:

Comments

Donaid bare said…
To reset the Ink Pad Counter, download the Ink Pad Reset Software from our website. We offer instant download software solutions to a range of Epson printer issues relating to waste ink pads.
waste ink reset
Anonymous said…
I have Epson WF7511, it's error, the result is shadowing, or not clear th copy or the print page. do anyone can help me?
bkolnik said…
And reset for Eps stylus rx 595 exists? Or can I use reseter for other printer?
Jann Lassalle said…
Hi bkolnik,

For RX595, try this:
http://fix-your-printer.blogspot.com/2014/09/activation-key-for-resetting-waste-ink.html
Anonymous said…
I replaced waste ink pad on Epson Workforce 633 - very easy. I ran the reset utility from Epson successfully but the message continues on the display that the ink pads are nearing the end of their service. I'm on a PC with Windows 7. I've turned the machine off and left it off for a while and the message continues. Any ideas on how to solve this?
Jann Lassalle said…
Hi,

Try this for Epson Workforce 633:
http://fix-your-printer.blogspot.fr/2013/01/an-officiel-reset-utility-for-some.html
Anonymous said…
It works for WorkForce 633! Thank You!
Cari Plotter said…
Thank you for sharing, it's really helped me...
Very nice article...
I like this article, can add knowledge to every person who read it, thanks
Dave Cabuyadao said…
I have Epson L210 series. Can i use the SSC service utility for it? If so, which one should i click under Printer Model? Please help.
Jann Lassalle said…
Hi Dave,

I don't think that SSC works for Epson L210.

Try this, but you have to buy a reset key:
http://www.2manuals.com/product_info.php?products_id=1149
OldBooksOnDisc said…
I have an Epson XP-800, just once it has displayed "Ink Pad Nearing End Of Life", does anyone know if there's a reset key available?
Many thanks in advance, Chris.
Jann Lassalle said…
Hi Chris,

You will find some tips pour XP-800 here:
http://www.printerknowledge.com/threads/how-to-reset-xp-800-waste-ink-pad-warning.8428/
Anonymous said…
Hi!. how can i reset Epson L120? please help...
Jann Lassalle said…
Hi,

More informations here for Epson L120:
http://fix-your-printer.blogspot.fr/2013/01/how-to-fix-error-e-91-or-e91-on-epson.html
Anonymous said…
Hi,

How do i reset my epson stylus c62? downloaded the ssc but it just keeps stating printer off when i try any command on it , thank you
Jann Lassalle said…
Hi,

For "printer off" try this:
http://fix-your-printer.blogspot.fr/2013/12/how-to-solve-error-message-printer-off.html
Blare said…
Hi!

Any solution for WF-2510 without buying a reset key?

Thanks!
Epson L210 said…
Hello Jann

Is there any solution to reset epson printer l210 ?

Thanks
Epson L210 said…
I'm sorry, I saw the solution! Thank you
Hi does it work with epson xp820? Any help would be appreciated. Thanks
Jann Lassalle said…
Hi Elphie,

Try solution 3 et 4 here:
http://fix-your-printer.blogspot.fr/2013/04/how-to-reset-waste-ink-pad-counter-on.html
Ken said…
Hi Jann,
Will the SSC SU work to reset my Epson XP420, so my 220 ink cartridges will work after refilling them with a refill kit? Thanks!
Ken
Jann Lassalle said…
Hi Ken,

The SSC su will reset only the waste ink counter (and it doesn't work for XP420).

If you want to reset your cartridges, you need to buy some chips or a chip resetter.
Zahira Almazan said…
Hi!

I have an Epson Stylus CX3650, all the lights are flashing and i have an 'E' on the display. I used SSC Service Utility 4.3v but a message appeared on th screen: "Printer off or some other problem!. How can I fix it? Thanks
Jann Lassalle said…
Hi Zahira,

Try this:
http://fix-your-printer.blogspot.fr/2013/12/how-to-solve-error-message-printer-off.html
How can i reset my epson stylus rx520?
Jann Lassalle said…
Hi Giorgio,

With SSC Service utility you can reset your RX520.
Steve Koepke said…
I have an Epson Workforce 500 attached to a UBUNTU System, is there a way to reset the ink pad full error?

Thanks
-Steve
Rude Lee said…
Hi, I have a Epson WF-4630 pro and need to reset my printer counter as I have changed cartridges but the counter does not change. I have used wicreset to change the firmware but they do no do the reset counter.... can you help ? I am willing to pay or donate if you can help me out.

Thanks, Rude
Jann Lassalle said…
Hi Rude,

What is the message or error code ?
Rude Lee said…
Hi, thanks for getting back to me. The problem is as the printer cartridge level goes down and I change the cartridge using a 3rd party cartridge the ink level on the screen stays at the same level even though there is a new full cartridge unless I use a genuine cartridge. I think I need to be able to reset the ink levels. I used Wicreset to downgrade my firmware so as I can use 3rd party cartridges but at the moment they do not reset ink levels. Any help you can give me would be greatly appreciated.

Regards, Rudy Snep
Jann Lassalle said…
Hi Rude,

You probably have to buy a new key to reset the ink level.
Pedro said…

Good morning, I get an error message E-91 on the EPSON Stylus Photo R240, according to the Internet It means "Waste Ink Pad", that the pads are saturated.
You must clean them and reset the machine with a reset program.

Can you help me?

Thank you.
Jann Lassalle said…
Hi Pedro,

You will need to buy a software to do the reset:
http://fix-your-printer.blogspot.fr/2013/01/how-to-fix-error-e-91-or-e91-on-epson.html

Popular posts from this blog

How to fix error B200 on canon Printers

MAJ11/06/17
Error B200 means the printhead voltage or temperature is not normal. The Printhead could be defective.... but first, try these solutions below:


Solution 1:
Disconnect the power cable from the printer.Wait 1 hour.Connect the power cable
Solution 2:
Check and Clean Head contact pin condition of the carriage unitCheck Cable connection especially the carriage FFC
Solution 3:
Turn off the power Open the panel Turn on the power Wait for print carriage to start moving to the left.Let it go past half way Before print carriage reaches left hand side shut the cover. Leave the Printer turned on
Solution 4:
Unplug the power cable.Open the printerPush the whole print head mechanic to the centerWhile the printer still open, plug the power and turn it ON. When the printhead still moving and is going to the very LEFT, close the cover. Wait until its boot up. 
Solution 4a:
Take out all of the ink cartridgesLift up the grey bar by where the ink goesLeft the print head in the middle of the pr…

Error 6000 or P03 on Canon printers

MAJ11/06/17
Error code 6000, P03 or E23 is a line feed error. It also should be flashing 3 times for this error on the on/off button.

You can have this error on these Canon printers: MP140, MP150, MP160, MP190, MP210, MP220, MP170, MP180, MP450, MP460, MP240, MP250, MP260, MP270, MP480, MP500, MP510, MP520, MP530, MP830, MP540, MP620, MP550, MP560, MP600, MP610, MP630, MP800, MP810, MP830, MP970, MP980, MG2100, MG3100, MG4100, MG5100, MP640, MP990, MG5200, MG5300, MG6100, MG6200, MG8100, MG8200,


Solution 1:
Verify that the paper tray is correctly set.If any object is placed in front of the machine, remove it.
Solution 2:
Search for any small pieces of paper in the printer, or a tiny object.
Solution 3:
Power off the printerWait 5 minutePower on. 
Solution 4:
Clean the encoder strip with a soft clothSolution 4a:
Clean the printhead
Solution 5: one of these parts could be faulty:
Timing sensor unit QM2-2683Timing slit disk film QC1-6229Feed roller ass'y QL2-0925Platten unit QM2-2923Logic board…

Error U052 on Canon printers

MAJ 14/10/14
Error U052 appears on these Canon printers: MX850, MP540, MP530, MP600, MP610, MP970 and others...

Message error: The type of print head is incorrect install the correct print head U052



Solution 1:
Remove and replace the cartridges.
Solution 2:
Insert new cartridges
Solution 3:
Reseat the print head to correct print issues or clear error.
Solution 3a (thanks to Tony LeBaigue):
Remove the ink cartridges.Remove the printhead: cleaned the rear contacts with a cotton bud and surgical spirit.Left the part 5 minutes to dry.Install the printhead and the cartridges. The printer wil be into printhead clean mode and will return to normal mode.
Solution 3b (thanks to Arjen - Canon MP610):
Power off the printer. Press and hold both selection buttons underneath the screen, and switch on the printer. After a long start up the 'copy' screen appeared, and it printed a copy of a sheet.
Solution 4:
Clean the printhead
Solution 4a:
The print head is broken and it must be changed by a new one…