Skip to main content

Error 5B00 on Canon printers Pixma MP140 to MP970

Procedure for MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970.


Solution:
  • Turn off the printer
  • Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
  • Hold the Power Button, release the Resume Button.
  • Not releasing the Power Button, double click “Resume” and release Both Buttons.
  • Click “Resume” for Four times
  • Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.

Comments

Anonymous said…
The MP 480 is not listed but I tried the solution. Unfortunatly it did not work.
Any other ideas for the MP 480. Error 5B00?
J.Lassalle said…
Hi,

For MP480:
http://fix-your-printer.blogspot.com/2011/10/how-to-reset-waste-ink-counter-on-canon.html
canon pixma mx397 printer show error 5B02 on display , can't print. than what can i do , Please help.
Unknown said…
FOR MX397 ERROR 5B02..

1. Turn off your printer 2. Press and hold the STOP/RESET button 3. Press and hold Power ON button 4. While holding the Power ON button, release the STOP/RESET button 5. While holding still the Power ON button, press twice the STOP/RESET button 6. Release the Power ON button 7. Wait until it display an "idle" message. It will take about a minute. 8. When "idle" appear, open the top cover to expose the cartridges. 9. Lift up the cover for cartridge holder and take out both the black and color cartridges 10. Return the cover of cartridge holder and turn off the printer 11. Return the top cover and turn on the printer again 12. After the printer initialize, return the cartridges. 1. Press and Hold the STOP/RESET button and wait until it self restart. 2. Release the STOP/RESET button the the printer is restarting. 3. Wait for a few seconds Another Method Turn OFF the printer, and unplug the power cord. Then, turn ON the printer again. If the problem still persists, contact the service center.

Trewlawney said…
hi my printer is canon mx477 and I have the same problem...please help....Thank you!
J.Lassalle said…
Hi Trewlawney,

Try solution 2 here:
http://fix-your-printer.blogspot.fr/2011/01/error-p7-p7-or-p07-5b00-on-canon.html
Popoamou said…
Hi i have canon mg 5650 with error 5B00 how to reste this error
J.Lassalle said…
Hi,

Try this procedure:
http://fix-your-printer.blogspot.fr/2016/02/service-tool-v3400-for-resetting-canon.html
Anonymous said…
Hi,
I can't get rid of the 5B00 error on a Canon Pixma MX882. Any suggestions?
J.Lassalle said…
Hi,

For Canon MX882, try this procedure:
http://fix-your-printer.blogspot.fr/2016/02/service-tool-v3400-for-resetting-canon.html
Unknown said…
mine is canon mp250 and got error 5B00,how to fx
J.Lassalle said…
Hi Alex,

Try this:
http://fix-your-printer.blogspot.fr/2011/07/resetting-waste-ink-counter-on-canon.html
Anonymous said…
anyone with solution for canon ts5040 5B00 code

Popular posts from this blog

How to fix error B200 on canon Printers

MAJ11/06/17 Error B200 means the printhead voltage or temperature is not normal. The Printhead could be defective.... but first, try these solutions below: Solution 1 : Disconnect the power cable from the printer. Wait 1 hour. Connect the power cable Solution 2 : Check and Clean Head contact pin condition of the carriage unit Check Cable connection especially the carriage FFC Solution 3 : Turn off the power Open the panel Turn on the power Wait for print carriage to start moving to the left. Let it go past half way Before print carriage reaches left hand side shut the cover. Leave the Printer turned on Solution 4 : Unplug the power cable. Open the printer Push the whole print head mechanic to the center While the printer still open, plug the power and turn it ON.  When the printhead still moving and is going to the very LEFT, close the cover.  Wait until its boot up.  Solution 4a: Take out all of the ink cartridges Lift up the gr

How to solve error code 006 with Canon Service Tool V3400

MAJ 25/08/17 The Service Tool V3400 allow to reset the counter of some Canon printers. For the error code 006 , try this : Solution 1: Check your cartridges: an empty cartridge can lead to error 006 Solution 2 : After you avec clicked on "Main", wait a few minutes.  If the error still here, restarts the Service Tool Solution 3 : Close the service tool Disconnect the USB cable from the printer After 10 seconds, plug back the cable to the printer On Windows, click next when appears "New device" Open the service tool

How to solve error B204 on Canon Maxify printers

The error B204 could happen after a cartridge replacement. First of all, when installing, remove the cartridges from the plastic package, but do not drill any plastic membranes, as this will cause this error when placing the cartridge. The error may also appear if you change a completely empty cartridge: when installing a full cartridge, the printer enters a cleaning cycle, but the printhead has not yet received ink from the newly inserted cartridge. Here are some tips to cancel this error B204:: Solution 1: Remove the cartridges Power the printer for 2 minutes Switch on the printer Install the cartrdiges Solution 2: Switch on the printer Unplug  the power cable Open the cover Move the print head carriage manually to the usual place where it goes for the cartridge change (If the printhead carriage is not movable, reconnect and then turn on the printer, then unplug it again when the head carriage is in the moving position). Change the cartridges. Close the fr