Skip to main content

HP OfficeJet Pro X476DW printer

HP OfficeJet Pro X476DW printer


  • CN622AM: No 970 Cyan Ink Cartridge (2500 Copies)
  • CN624AM: No 970 Yellow Ink Cartridge (2500 Copies)
  • CN626A: No 970XL Cyan Ink Cartridge (6600 Copies)
  • CN627A: No 970XL Magenta Ink Cartridge (6600 Copies)
  • CN628A: No 970XL Yellow Ink Cartridge (6600 Copies)


  • Error 0xc6fd0303, printhead missing: power off and unplug the printer; wait 2 hours. Plug back and switch on.If the error still there, the printhead or main board could be defective.
This is the same thing for these error code: 0xc6fd0002, 0xc6fd0102, 0xc6fd0202, 0xc6fd0302, 0xc6fd0402, 0xc6fd0502, 0xc6fd0602, 0xc6fd0702, 0xc6fd0802, 0xc6fd0902, 0xc6fd0003, 0xc6fd0103, 0xc6fd0203, 0xc6fd0303, 0xc6fd0403, 0xc6fd0503, 0xc6fd0603, 0xc6fd0703, 0xc6fd0803, 0xc6fd0903. 0xc6fd0013, 0xc6fd0113, 0xc6fd0213, 0xc6fd0313, 0xc6fd0413, 0xc6fd0513, 0xc6fd0613, 0xc6fd0713, 0xc6fd0813, 0xc6fd0913, 0xc7140024, 0xc8190014


Popular posts from this blog

Service tool V3400 for resetting Canon printers counter

The Service Tool V3400, and service tool V3600, allow you to reset the waste ink pad counter on some Canon printers: 

You can solve the messages errors "Waste Ink Tank Full" or "Waste Ink Pad Full", "error 5B00" or "Error P07" on these printers:
Canon Pixma iP2700, iP4800, iP4810, iP4840, iP4850, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880 Canon Pixma MP230, MP240; MP250; MP260; MP270; MP280; MP480; MP490; MP540; MP550; MP560; MP620; MP630; MP640; MP980; MP990; Canon Pixma IX6500, IX6510, IX7000 Canon Pixma IP3600, IP4940 Canon Pixma PRO9000, PRO9500 Canon Pixma MG2120. MG2140, MG2240, MG2250, MG2440, MG3240, MG3140, MG4100, MG4140, MG5140, MG5150, MG5240, MG5340, MG6140, MG6240, MG8140, MG8240 Canon MX397, MX320, MX330, MX370, MX860 etc
Where can you download the Service Tool V3400 ?

It is free here:
There is too a paid version here:
V3400 Canon Service Tool for all iPxxxx series, i…

How to fix error B200 on canon Printers

Error B200 means the printhead voltage or temperature is not normal. The Printhead could be defective.... but first, try these solutions below:

Solution 1:
Disconnect the power cable from the printer.Wait 1 hour.Connect the power cable
Solution 2:
Check and Clean Head contact pin condition of the carriage unitCheck Cable connection especially the carriage FFC
Solution 3:
Turn off the power Open the panel Turn on the power Wait for print carriage to start moving to the left.Let it go past half way Before print carriage reaches left hand side shut the cover. Leave the Printer turned on
Solution 4:
Unplug the power cable.Open the printerPush the whole print head mechanic to the centerWhile the printer still open, plug the power and turn it ON. When the printhead still moving and is going to the very LEFT, close the cover. Wait until its boot up. 
Solution 4a:
Take out all of the ink cartridgesLift up the grey bar by where the ink goesLeft the print head in the middle of the pr…

How to solve error code 006 with Canon Service Tool V3400

MAJ 25/08/17 The Service Tool V3400 allow to reset the counter of some Canon printers.

For the error code 006, try this:

Solution 1:
Check your cartridges: an empty cartridge can lead to error 006
Solution 2:
After you avec clicked on "Main", wait a few minutes. If the error still here, restarts the Service Tool
Solution 3:
Close the service toolDisconnect the USB cable from the printerAfter 10 seconds, plug back the cable to the printerOn Windows, click next when appears "New device"Open the service tool