Reset transfert belt counter on Xerox Phaser 6110 MFP

Sometimes, when you have replaced the Image Transfer Belt, the printer still does not work. You will have to reset the counter.

  • Enter Service Mode by pressing [MENU] [#] [1] [9] [3] [4] quickly.
  • Select Tech Menu
  • Select DataSetup
  • Arrow to Clear Counts and press Enter
  • Enter Password 1934
  • Arrow to Transfer Belt and press Enter.

The display will show Clearing Counts and then return you to the Tech Menu. Press exit several times to exit the Tech Menu and then power cycle the printer.

No comments: