MAJ 23/09/17
Here is the procedure to reset the waste ink tanck counter:Solution 1:
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
Solution 2:
1. Turn off the printer. And disconnect the printer cable.
2. Press and HOLD the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
Comments