Fix your printer !

Error 000041 appears frenquently after you have replace one or several cartridges. Here are some solutions to fix this issue.


Solution 1:
Check that your cartridges are correctly installed.
Solution 2:
Press and hold on the "Stop" button for 30 seconds.
Solution 3:
The error 000041 could be a paper jam in some case.Check carrefully inside the printer for a little sheet of paper or some little object.

Here is a video showing the procedure to replace the Paper Feed Kit inc Pickup Roller and Separation Pad LM6291001for printers Brother MFC-7420, MFC-7820, DCP-7010, DCP-7020 and DCP-7025.

Downloads:
Divers and manuals
Cartridges:
PGI-1500XLBK: Cartridge black Noire XL (1200 sheets) 9182B001PGI-1500XLC: Cartridge Cyan XL (935 sheets) 9183B001PGI-1500XLM: Cartridge Magenta XL (935 sheets) 9184B001PGI-1500XLY: Cartridge Yellow XL (935 sheets) 9185B001PGI-1500XLCMYBK : Pack Cartridges Black, Cyan, Magenta, Yellow XL 9182B004
Parts:
QY6-0087: Printhead QK2-0205: Power supply

Dépannage:
Error B204Error code 5B00 : you have to do a reset of the printer (try the procedure in the video bellow)

The error B204 could happen after a cartridge replacement.

First of all, when installing, remove the cartridges from the plastic package, but do not drill any plastic membranes, as this will cause this error when placing the cartridge.

The error may also appear if you change a completely empty cartridge: when installing a full cartridge, the printer enters a cleaning cycle, but the printhead has not yet received ink from the newly inserted cartridge.

Here are some tips to cancel this error B204::

Solution 1:
Remove the cartridgesPower the printer for 2 minutesSwitch on the printerInstall the cartrdiges
Solution 2:
Switch on the printerUnplug  the power cableOpen the coverMove the print head carriage manually to the usual place where it goes for the cartridge change (If the printhead carriage is not movable, reconnect and then turn on the printer, then unplug it again when the head carriage is in the moving position).Change the cartridges.Close the front cover of the printer, plug in the …

Téléchargements:
Drivers and downloads
Consommables:
T6641: Cartridge black T664 4000 SheetsT6642: Cartridge  cyan Epson T664 65000 SheetsT6643: Cartridge  magenta Epson T664 65000 SheetsT6644: Cartridge  yellow Epson T664 65000 Sheets
Troubleshooting:
How to reset the waste ink counter (message error "ink pads are at the end of their service life"):Solution 1:
Step 1: Power off the printer
Step 2: Press and hold on the reset button at the back of the printer with a paper clip or the tip of a pencil.


Step 3: Power on the printer by pressing and holding the power button
Step 4: After 5 seconds, the printer will print a sheet. Then, release the two buttons.

Solution 2:
You have to buy a key to do the reset (resetkey for exemple)

Here are some solutions to solves error code 015-0001 on printers Canon i-SENSYS MF623C, MF8350Cdn, mf9280cdn, etc


Solution 1: Description Developing roller release operation defect
After the specified time from rotating the main motor for the developing roller depress/release, the output of the developing home position sensor does not change.
Causes: Developing home position sensor defect, Main motor defect, DC controller PCB defect
Remedy:Check the connector of the developer home position sensor, main motor, DC controller PCB 
Replace the developer home position sensor
Replace the main motor 
Replace the DC controller PCB

Solution 2: Cassette 1 lift-up errorAfter lift-up of the Lifting Plate of the cassette of the host machine started, ON status of the Lifter Sensor of the cassette of the host machine was not detected within the specified period of time.

Remedy. While the cassette of the host machine is removed, turn ON the power and insert the cassette, then check the ope…

Here are two solutions to reset the waste ink counter on Brother printers MFC-J460DW MFC-J480DW MFC-J485DW:


Solution 1:

1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.b. Select [Reset]. Press OK.c. Select the reset option you want to use. Press OK. 3. Press 1 for [Yes] to confirm.
4. Press 1 for [Yes] to reboot the machine
Solution 2:
Clear the screen with the stop/exit buttonHit the settings button (wrench)enter the following 5 keys * 2 8 6 4use the down arrow until you come to the purge followed by some numbers.Press 2 7 8 and 3I got a ‘cannot detect’ message, and the stop/exit button didn’t work so then I did step 7 and got outpress 9 and then 9 againmachine reboots and page count is clear

If the orange light is on, try these tips:


Solution 1:
Check the cartridges: they must no be emptyCheck the paper too in the paper tray.
Solution 2:
Power off and unplug the printer for a dayPlug back et switch on
Solution 3:
Power off and unplug the printerPress the power button, and without release it, plug back the power cable.
Solution 4:
Power off and unplug the printerPress the power button for one minutePlug back the power cable.
If the problem persist, the main board could be defective

Brother:
LM4009001: DCP-7010, DCP-7010L, DCP-7025, Fax 2820, Fax 2825, Fax 2920, HL-2030 Series, HL-2035 Series, HL-2040 Series, HL-2070N, MFC-7220, MFC-7225N, MFC-7420, MFC-7820N MSP2800: Brother Laser Printer HL5450DN HL5440D HL5450 HL6180DWT HL5450DNT HL5470DW HL6180DW HL5450D HL5470DWT, Brother Multifunction MFC8520DN MFC8950DW MFC8510DN DCP8250DN DCP8110DN MFC8910DW MFC8912DW MFC8710DW MFC8950DWT MFC8712DW DCP8155DN DCP8157DN MFC8512DN MFC8952DWT MFC8515DN MFC8952DW

Canon:
ASLELJ1300: i-SENSYS MF3220 RM1-7541-FILM: Canon i-SENSYS LBP 6650DN LBP 6310DN LBP 6300DN, Canon Laser Printers LBP-6670dn LBP-6680 LBP-6600, Canon COPY IR1133A IR1133 IR1133IF, Canon imageClass MF4770nFM2-5296:Canon COPY IR1024 IR1018 IR1020 IR1019 IR1022 IR1023 IR1025, Canon i-SENSYS FAX-L3000 FM3-3653-FILM: Canon COPY IR 2016 IR 2018 IR 2318 IR 2120J IR 2520 IR 2800 IR 2420 IR 2870 IR 2116J IR 3320 IR 2530 IR 2320 IR 2020 IR 2022 IR 2025 IR 2030 IR 2120S IR 2200 IR 2270 IR 2525 IR 3300 IR 3570 IR 4570

Epson:
…

Here is the procedure te replace the old transfer roller (RM1-9175) with the new one on these HP printers: LaserJet Pro 400 M401a M401dn M401dw M401n M425dn et M425dw.

Do not touch the black surface of the new roller..


Step 1:
Open the cover to remove the toner
Step 2: (see picture below)
In the toner slot, lift and hold the hinged metal plate ( -1- in the picture)While holding the metal plate up, release the 2 black plastic tabs (-2- in the picture)Pull the black plastic sleeve up until it is free, then slide the transfer roller (-3- in the picture) up and to the right to remove it.
Step 3:
Insert the black plastic sleeve onto the tip of the new transfer roller, then first install the left end of the transfer roller, followed by the right end of the transfer roller and the locking of the black plastic ring.

When you have the orange light on, not blinking, on Canon Pxima MG55xx printers, try these tips:

Solution 1:
Firts, check the cartridges (they should not be empty) and the paper tray.
Solution 2:
Power off and umplug the printer for 24hPlug back and switch on
Solution 3:
Power off and umplug the printer Press and hold on the "power" button, then plug back the power cable
Solution 4:
Power off and umplug the printer Press and hold on the "power" button for one minute.Plug back the power cable
If the problem persist, the main board is probably defective

2153704: Thermal printhead FP-90III, Fiscal 

1460498, 1649504, 1410892: Thermal printhead TM-H6000III TM-T81F TM-H6000II 2133238, 2152781, 2153605, 2153996: Thermal printhead TM-H6000IV 
2130811: Thermal printhead TM-T20 TM-T800F Fiscal  2149636:

Here is the procedure to desactivate the Status Monitor:

Click on "search on web and Windows"Select "periphals and printers"Select your printer et click right on "printer settings"Select "Maintenance Tab"Click on "desactivate Epson Status Monitor"

Here are some solutions to solve the error code 0x69 on Epson Workforce printers WF-3620, WF3640, WF-3620DW, WF-7610...



Solution 1:
Check the cartridges: they must be well intalled
Solution 2:
Check the cartridges cover: it must be well closed

Downloads:
Drivers and manuals
Cartridges:
CN621AM: No 970 Black Ink Cartridge (3000 Copies) CN622AM: No 970 Cyan Ink Cartridge (2500 Copies)CN623AM: No 970 Magenta Ink Cartridge (2500 Copies) CN624AM: No 970 Yellow Ink Cartridge (2500 Copies)CN625AM: No 970XL Black Ink Cartridge (9200 Copies) CN626A: No 970XL Cyan Ink Cartridge (6600 Copies)CN627A: No 970XL Magenta Ink Cartridge (6600 Copies)CN628A: No 970XL Yellow Ink Cartridge (6600 Copies)
Parts:
CN595A Bac papier optionnel 500 feuilles CN598-67004: Duplex assembly CN598-67007: Output Tray Assembly CN598-67008: Automatic document feeder (ADF) assembly CN598-67018: HP Separator pickup assembly CN598-67045: Printhead
Troubleshooting:
Error 0xc6fd0303, printhead missing: power off and unplug the printer; wait 2 hours. Plug back and switch on.If the error still there, the printhead or main board could be defective. This is the same thing for these error code: 0xc6fd0002, 0xc6fd0102, 0xc6fd0202, 0xc6fd0302, 0xc6fd0402, 0xc6fd0502, 0xc6fd0602, 0xc6fd0…

The error code 0x9a could appears on these Epson printers:
Epson Workforce WF3010, WF3011, WF3012, WF3520, WF3521, WF3530, WF3531, WF3232, WF3540, WF3541Epson Workforce WF5690, WF4640, WF4630, WF5620, WF5190, WF5110Epson Workforce WF7110, WF7610, WF7620Epson Expression Photo XP55, XP510, XP520, XP600, XP601, XP605, XP610, XP615, XP620, XP621, XP625, XP700, XP701, XP702, XP710, XP720, XP721, XP750, XP760, XP800, XP801, XP802, XP810, XP820, XP821, XP850, XP860XP950
This error indicate a failure of the electronical board.


Try this:
Power off and unplug the printer for an hourPlug back and switch onIf the error still appears, you have to contact the Epson support

MAJ 24/08/17
Downloads:
Drivers and manuals
Toners:
44992401: Toner black (1500 pages)44992402: Toner black (2500 pages) 44574307: Drum (25000 pages)
Parts:
44565806: Fuser 220v 43922301: MPT Manual Tray 1 Pickup Roller44384701: Retard Roller Assy - Fits in Paper Cassette Tray 44483301: Hopping Roller44483601: Pickup Roller 43355101: Manual Paper Tray 1 Pinch Roller43932701: 230v ACDC Power Switch PCB44135601: Feed Roller44317201: LED Printhead Assembly44432101: Transfer Roller44559001: 250 Sheet Paper Cassette Assembly 44563701: Duplex Unit
Troubleshooting:
How to remove paper jams (PDF)
Error codes:
    Code: 001 - Machine Check Exception    Code: 002 - DSI Exception (Data read failure)    Code: 003 - ISI Exception (Instruction read failure)    Code: 004 - Alignment Exception (Memory access error)    Code: 005 - Program Exception (Illegal instruction, trap instruction, privilege violation, and so on)    Code: 006 - Floating-point Unavailable Exception    Code: 007 - Instruction Address Breakpoint…