Skip to main content

Posts

Showing posts from November, 2010

Error 5B00 on Canon printers Pixma MP140 to MP970

Procedure for MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970. Solution : Turn off the printer Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green. Hold the Power Button, release the Resume Button. Not releasing the Power Button, double click “Resume” and release Both Buttons. Click “Resume” for Four times Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.

Error U051 on Canon Printers

MAJ 10/09/15 Error U051 means "no print head installed. Install the print head". It's a cartridge error or the printhead is defective. Solution 1 : Press the triangle button for 5 seconds:   Solution 2 : Reinstall the cartridges; change the cartridges if the error persists. Solution 3: If the error persists: verify that the contacts on the cartridges and the ink cartridge are clean and unscratched. Finally, it is possible that the printhead is defective.

Error U052 on Canon printers

MAJ 14/10/14 Error U052 appears on these Canon printers: MX850, MP540, MP530, MP600, MP610, MP970 and others... Message error: The type of print head is incorrect install the correct print head U052 Solution 1 : Remove and replace the cartridges. Solution 2 : Insert new cartridges Solution 3 : Reseat the print head to correct print issues or clear error. Solution 3a (thanks to Tony LeBaigue ): Remove the ink cartridges. Remove the printhead: cleaned the rear contacts with a cotton bud and surgical spirit. Left the part 5 minutes to dry. Install the printhead and the cartridges. The printer wil be into printhead clean mode and will return to normal mode. Solution 3b (thanks to Arjen - Canon MP610): Power off the printer. Press and hold both selection buttons underneath the screen, and switch on the printer.  After a long start up the 'copy' screen appeared, and it printed a copy of a sheet. Solution 4 : Clean the pri

Fixing error 0xc19a0023 on HP printers

Ink system failure oxc19a0023 on Photosmart D7560, D5460, C5580, C5380, C6380 and more... Solution 1 : Turn the unit off,. Unplug the power cord and wait 30 seconds before reconnecting the power. Turn on the printer Solution 2 : Press and hold "left arrow" key Press the "setup" key and release both keys Press and release the "OK" button Press and release the right arrow button until the display says “System Configuration Menu”. 2. Press and release the “OK” button. Display should say “Hardware failure status”. If not there already, Arrow Key over to “Hardware failure status”, Press and release the “OK” button. Display should say “Hardware failure status: Clear. Press OK to clear”. Press and release the “OK” Button. Message changes to “Hardware failure status Cleared. Press Cancel to continue”. Press and release the “CANCEL” button as many times as necessary, so that, either the “Welcome to Photosmart Express” screen appears, or