Skip to main content

Posts

Showing posts from August, 2010

How to reset the ink absorber´s counter for Canon Pixma iP4600 iP4700 and more...

MAJ 13/2/18 Error : You get a message like "Waste tank full" or "Ink absorber full". A green and an orange LED blink alternately seven times (that´s 14 times in total). The driver shows a message like " Error code 5B00 " and an advice to call the Service-Center. Solution 1 : Download " Service Mode Tool Version 1.050 " on the internet: this software allows you to reset the internal counter to "0". To apply this software you have to put the printer in service mode: Switch off the printer Push and hold the "Resume" button Push and hold the "Power" button Hold both buttons for about five seconds Let go of the "Resume" button Press the "Resume" button twice Let go of the "Power" butto When the green LED stops blinking and lights continuously the printer is in service mode.  Install the programm. To reset the counter to zero level ( D=000.0 ) go to "SET CLEAR