Skip to main content

Posts

Showing posts from May, 2009

How to do a hard reset on HP C6180 printer

   MAJ 23/09/17  Here is the procedure for a hard reset of the HP C6180 printer: 1. Remove all cables. 2. Unplug the printer power. 3. Hold down # and 6 on the keyboard. 4. Plug the power cord back in.

Waste Tank Reset Code for Canon S9000, S300, S330, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000

   MAJ 23/09/17 Here is the procedure to reset the waste ink counter for Canon printers S9000, S300, S330, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000: 1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep holding down Power button and let Resume button go. 4. Press Resume button 2 times then let BOTH buttons go. 5. Green lights will flash and then stop blinking. 6. When green lights are solid, press the Resume button 4 times. 7. Press the Power button and the printer should turn off, if not, press the Power button once more. 8. Your printer should respond as normal.

Waste Tank Reset Code for Canon I320, I255

MAJ 23/09/17 Here is the procedure to reset the waste ink tanck counter: Solution 1: 1. Unplug power and USB. 2. Open door and hold power button. 3. Connect power. 4. Close door, then release power button. Solution 2: 1. Turn off the printer. And disconnect the printer cable. 2. Press and HOLD the POWER button, turn on the printer. 3. The indicator (L.E.D.) should be green. 4. Press and release the RESUME button , the indicator (L.E.D.) should be orange. 5. Press and release the RESUME button again, the indicator (L.E.D.) should be green. 6. Release both buttons.

How to solve Error ##335 on Canon printers

   MAJ 23/09/17 The error ##335 is an electronical failure. Solution 1 : Check the cable of the printhead Solution 2: Download the last driver on the Canon website. Solution 3 : Remove the cartridges and the printhead. Power off the printer for 5 minutes. Switch on and reinstall the printhead and the cartridgeser. Solution 4 : Power off the printer and disconnect the power cable for 10 minutes Solution 5 : Remove the printhead and clean the contacts

Fatal Errors 140,141,142 on Oki C7200

The printer displays a "Fatal Error - 140 Contact Service". The error codes can range from 140, 141, & 142. This error indicates that the Image Drum Up/Down Process is not working properly. The errors are as follows: 140 - Yellow Drum Up/Down error 141 - Magenta Drum Up/Down error 142 - Cyan Drum Up/Down error Solution : 1. Reseat the Image Drums. Ensure they are in seating properly into the drum carriage. 2. Reseat the Toner Cartridges. Ensure they are seating properly into the Image Drums. 3. Reseat the Contact Sensor Spring assembly and inspect it for damage or mis-alignment. If the springs appear bent or dis-lodged reseat them. 4. Try a new Transfer Belt. Source: Oki knowledge base

Waste ink tank reset for Canon S9000

MAJ 17/10/16 Here is the procedure to reset the waste ink counter on Canon S9000. Turn off the power. Hold down "Resume" button and press "Power" button. Keep holding down "Power" button and let the "Resume" button go. Press "Resume" button 2 times then let both buttons go. Green light will flash then stop blinking. When Green light is solid, press "Resume" button 4 times. Press the Power button and the printer should turn off. If not, press the Power button 1 more time.